S400SIL premium performance reflective silver sew-on trim has wide range of applications. Main uses are in safety garments and performance
active garments and accessories. Wash performance of this product outperforms most similar products. With this product, garment manufacturers
can increase low-light visibility and performance of their garments when applied correctly.
It is composed of retroreflective glass spheres and an aluminum stratum laminated onto cotton/polyester fabric.
|
Retroreflective performance
Our products follow generally used measurement parameters in the garment industry eg. Retroreflection cd.lux/㎡.
S400SIL has a reflective index of 500 cd.lux/㎡.
Depending on wear, use, laundering and environmental conditions, the performance will be affected. For further details, please contact our
technical customer support.
|
Notice! Yezi Reflex Corp. products follow industry standards for minimum performance requirements.
In many cases our products clearly over perform these standards and competing products.
S400SIL EN 471:2003+A1:2007 & EN ISO 20471:2013 certified and meets or exceeds the following performance parameters:
|
|
 |
Retroreflective performance of new material |
Separate performance material |
EN 471+A1 level 2, clause 6.1 |
EN ISO 20471, clause 6.1
|
Retroreflective performance after test exposure (Clause 6.2) |
Abrasion |
EN 471: EN 530, Method 2, 5000 rubs |
EN ISO 20471 : ISO 12947-2, inverted
|
mode, 5000 rubs |
Flexing |
ISO 7854, Method A, 7500 cycles |
Folding at cold temperatures |
ISO 4675, -20℃ |
Temperature variation |
12 hours @50±2℃/ 20 hours @-30℃±2℃ |
Influence of rainfall |
EN 471+A1, Annex C |
EN ISO 20471, Annex B
|
Washing according to care label (EN 471: 7.4.5.2, EN ISO 20471: 7.5.2 |
Domestic Washing & Drying |
ISO 6330, Method 2A, |
100 cycles @60℃ |
Dried Stress-free at 50±5℃ |
Industrial Washing & Drying |
ISO 15797, method 8, tunnel/cabinet |
25 cycles @60℃ |
finishing (procedure B) |
Dry cleaning according to care label (EN 471: 7.4.5.3, EN ISO 20471:7.5.3) |
Dry cleaning, 50 cycles |
ISO 3175, method 9.1 |
 |
|
|
S400SIL is designed to be sewn onto fabric. Converters and end-users are advised to pre-determine the best sewing method prior to
commercial use.
|
Notice! The life of S400SIL is determined by cleaning methods and wear. Test to ensure compatibility with life of finished garment.
|
|
 |
S400SIL – Washing instructions |
Domestic wash |
Dry cleaning |
Industrial wash |
Ironing |
- Machine wash warm/hot, 60°C (140°F)
- Avoid bleach
- Tumble dry low
|
|
|
|
 |
|
|
|
This material is roughly composed of four layers; fabric, adhesive, aluminum stratum and glass bead layers.
.
|
|
 |
Polyester Fabric |
44% (by weight) |
Adhesive |
20% (by weight) |
Al. stratum |
0.01% (by weight) |
Glass bead |
36% (by weight) |
 |
|
|
S400SIL is supplied normally supplied in jumbo rolls (40 inch * 50m) or slit into smaller rolls (50mm * 50m).
Other dimensions are available upon request.
S400SIL can be shipped from Korea or from Porto (Portugal) warehouses
|
To order Yezi Reflex S400SIL contact our sales representative in your country or contact directly global sales team +82-2-415-8803.
|
Store S400SIL in a cool, dry area. Store rolls in original packing cartons. Partially used rolls should be stored in original packing cartons
or suspended horizontally through the core.
|
|
 |
|
Headquarters/Factory : 745-6 SUCHON-RI,JANGAN-MYEON,HWASEONG-SI,GYEONGGI-DO, KOREA 445-944 |
Sales Office : #1207, aT Center, Gangnam-daero 27, Seocho-gu, Seoul, Korea 06774 |
Tel : +82-2-415-8803 E-mail : yezi@yezi.biz Fax : +82-2-415-8823 Webpage : www.yezi.biz |
COPYRIGHT (C) 2017 Yezi Reflex Corp. ALL RIGHTS RESERVED. |
|